Model: GHZK-1600

Filter medium: air

Material: Carbon steel

Working pressure :0.6mpa

Operating temperature: room temperature

Form/knot: single layer

Filtering accuracy :2um

Scope of use: metallurgical chlor-alkali chemical oxygen production station

Products introduction:

The self-cleaning air filter of metallurgical chlor-alkali chemical oxygen station is a new type of pre-cleaning air filter with automatic ash cleaning function. The self-cleaning air filter produced by Guohai Filter is a whole box-type structure with high structural strength and good sealing. It is composed of imported filter paper filter cartridge, Venturi tube, self-cleaning nozzle, backblowing system, control system, clean air chamber and outlet, frame, etc. In the process of air filtration, due to the adsorption of dust, the internal and external pressure difference of the air flow flowing through the air filter element will gradually increase, when the internal and external pressure difference of the filter element is greater than a certain value, the pulse controller; That is, automatic start, it controls the pulse valve; In a very short time, the compressed air is used to carry out pulse backwashing from the inside out to each filter element to remove the accumulated dust adsorbed on the filter element; When the filter element is washed clean (that is, the internal and external pressure difference is less than a certain set value or after several cycles of backwashing), the washing process and self-stop. Because the compressed air backwashing is injected into the filter through the venturi tube, it not only consumes little air, but also has strong explosive force and good flushing effect.

Performance characteristics:

1, self-cleaning air filter can be added at the bottom of the dust collection box, dust filter, water rinse dust removal method to solve secondary pollution according to user requirements.

2, the equipment is controlled by the intelligent distributor, there are four self-cleaning methods, namely (1) timing; (2) pressure difference; (3) Manual; (4) Remote. 3, the equipment can realize the automatic cleaning of the air filter element, so that the equipment can operate as usual, without affecting the normal work of other filter elements.

4. It can work normally under the condition of 100% relative humidity.

5, the filter area is large, the flow rate is low, the resistance loss is small, and the liquid crystal display resistance loss.

6, filter element long service life. Under normal environmental conditions, the replacement cycle of the filter element can reach 1-2 years of life. 7, high degree of automation, the main components of imported parts, can achieve unmanned operation.

8, back blowing air consumption is small, generally 0.1 ~ 0.3m3/min(inhalation state); The pressure is 0.4 ~ 0.6Mpa. 9, the weight of the equipment is light, is the same capacity of cloth bag 1/3-1/2.

10, reasonable design, to achieve no bending design, high-rise modular type, easy to install, fast.

11, this product has special requirements, the company can carry out non-standard design and production according to customer requirements, to meet customer needs.

Technical parameter:

Model :GHZK-1600

Air filter star (3/min suction state):1600 

treatment air volume (m 3/ h): 96000

Filter area :1600

Number of cartridge :80

 Initial resistance Pa:<=150

Power consumption W:150W/AC220V 

blowback pressure Mpa: 0.4-0.6

 Filter medium: atmosphere, air

Filter size mm(length, width and height):4400*3520*2800

Applications:

More product recommendations:

Natural gas compressor room self-cleaning air filter

2100m3/min self-cleaning air filter