H14 high-efficiency plateless frame filter adopts ultra-fine glass fiber filter paper or polypropylene filter paper as filter material, which is formed by close folding. The tightly folded filter paper is made of paper separators or aluminum foil separators to keep the small inserts spaced apart, maintaining smooth channels. The outer frame is galvanized sheet, stainless steel sheet or aluminum alloy profile, and is sealed with a new polyurethane sealant. It can be widely used in general filtration in industries such as electronics, pharmaceuticals, hospitals, food, etc., and can also be used in high temperature resistant places. This kind of filter mainly filters dust particles below 0.5um in the air, and is widely used in the end of clean room clean room with higher requirements, such as equipment required for 10,000, 1,000, and 100 levels.
Filter efficiency grades H10~H14 are available
Special ultra-fine glass fiber filter paper as filter material, high efficiency and low resistance
Can bring double-sided protective net to protect the filter material, good strength
Lightweight and compact
1. Regularly check the air inlet surface of the filter for clogging and damage to the surface of the filter material;
2. If any objects block the surface, they should be removed;
3. If the surface of the filter material is seriously damaged, it must be replaced with a new filter material or replaced with a new filter;
4. When the filter is installed, it is necessary to ensure that the sealing edge of the frame is well sealed to prevent the leakage of air volume;
5. Do not use heavy objects to hit the surface of the filter, or use force to pull the surface of the filter material;
6. During installation, the length of the filter bag opening should be perpendicular to the ground to ensure the filtering effect of the air supply and increase the service life.
Contact:
Attn: Ada wang
Email: filtersales03@le-filter.com
Whatapp/wechat/Mob: 0086 18695927657
Skype: filtersales03
