Mobile welding dust collector for air purifier

Technical parameters of single-arm mobile welding fume dust collector LFHY-4000B welding fume dust collector:

Power (KW): 0.75/1.1/1.5/3/4/5

Rotation speed (r/min): 2840

Flow rate (m³/h): 1900-6000

Wind pressure (Pa): 1720-1580

Noise (＜dB): 85

Number of filter elements: 1

Dust cleaning method: manual / automatic (optional)

Suction arm diameter * length (mm): 160*2000

Single-arm mobile welding fume dust collector LFHY-4000B welding fume dust collector equipment advantages:

1. Suction cover - easy to clean, easy to disassemble, optional colors, showing personality and fashion;

2. Suction arm - hose, built-in stainless steel frame, convenient, simple and fast;

3. Machine shell - cold-rolled plate, electrostatic spraying technology, superior performance;

4. Motor - Siemens, with large air volume, good effect, low noise and sufficient power;

5. Filter - Japanese filter paper, German film coating technology, the filtration effect is super high;

6. Controller - well designed, highly reliable, easy to operate, easy to use and master;

7. Support wheel - made of shock-absorbing material, humanized design with brake, easy to use;

Single-arm mobile welding fume dust collector LFHY-4000B welding fume dust collector performance features:

1. It is equipped with a dedicated ABB turbine fan and motor, and adopts an anti-overload circuit to prevent the motor from burning out. 

It has high performance and stable working performance.

2. It adopts built-in centralized PLC control mode, with simple structure and easy operation.

3. Pulse backflush automatic dust cleaning: The filter element adopts automatic rotating backflush cleaning to make the surface of the filter 

element more dust-free and clean, which can always ensure that the dust collector has a constant air suction volume; the air compressor part 

is connected by a high-pressure hose, and the bottom High-pressure air intake ensures that the purifier is always in good working condition.

4. The filter cartridge is made of materials with long service life, can absorb dust particles below 0.3μm, and has a good filtering effect on wet 

and sticky dust.

5. Using the universal suction arm that can move 360 degrees freely, the smoke can be sucked out from the place where the smoke occurs, which 

greatly improves the collection rate of smoke and dust and ensures the health of workers.

6. The smoke purifier adopts three protective measures against fire hazards and large particles of slag, so that the purifier has a long service life 

and is reliable.

7. Clean air is evenly guided and dispersed from the direction of the grille-shaped air outlet, thereby reducing noise.

8. It is equipped with special new Korean-style swivel casters with brakes to facilitate the random movement and positioning of the equipment.

9. Photoelectric control on and off, energy saving, cantilever cover with lighting device (optional).

10. The consumables in the purifier have stable performance and are easy to replace.

Single-arm mobile welding fume dust collector LFHY-4000B welding fume dust collector operating performance:

1) Operability: The single-arm welding smoke purifier adopts an integrated control system and can be operated with one button. You only need 

to turn on the button on the main unit of the equipment to use it directly, making it convenient for customers to operate.

2) Make sure all parts are firmly connected before use

3) It should be used on a solid and flat ground to avoid noise caused by shaking of the machine.

4) When using the machine, connect it to the AC380V power supply and do not share the same socket with other electrical appliances.

5) When moving or transporting the machine, do not tilt the machine more than 45 degrees.

6) When using this machine, be sure to keep a space of no less than 50cm-100cm around it.

7) The equipment is simple to operate. Intelligent design has been adopted in the control system panel of the equipment. Aim the vacuum tube 

above the welding point that needs to be purified, turn on the power switch to start working, and turn off the power switch after the operation 

is completed.

8) The connection between the suction hose and the equipment needs to be properly sealed to prevent the hose from being collided and buckled 

by external forces, otherwise the air flow may be affected.

9) There are no wearing parts in the single-arm welding fume purifier, and the filter element in the purification cabin can be used normally after 

regular cleaning and maintenance.