Brief introduction of Fume extractor
Mobile welding fume deduster is used to purify dust and dust in process of welding, polishing, cutting and grinding, and to recycle rare metals and valuable materials.
It can purify a lot of tiny metal particles suspended in air and harmful to human body. It has the characteristics of high purification efficiency, low noise, flexible use, small area and so on.
1. It can be flexibly moved to any position of the factory, and it is not restricted by the unfixed position of the dust point and the post.
2.The equipment is equipped with a cardan wheel to facilitate the positioning and movement of the equipment.
3. the rated air flow, dust removal rate is more than 99.97%, the clean air can be discharged after the treatment cycle emissions directly in the workshop.
4. Using PTFE polyester film coated filter, high precision, high purification efficiency, low cost of consumables, no frequent replacement, conservation of environmental protection.
5. The equipment has built-in automatic pulse cleaning device to keep the constant air absorption and constant purification capacity. (can be selected according to the requirements)
6. The use of flexible air suction arm, can be suspended in any position of three-dimensional space, 360 degrees easily and flexibly reach any position of dust point.
7. Through special vibration reduction and noise reduction treatment, ensure the noise and environmental protection of the equipment.
8. The equipment is easy to operate and easy to clean and maintain.
Double arms dust collector
Working method: mobile move
Dealing capacity:3000m3/h
Power:3kw
Voltage:AC380V/50Hz(according to your requirement)
Filter efficiency:>99.9%(0.3um)
Machine size:700*800*1100mm
Filter area:>20m2
Emission concentration:30mg/Mm3
Filter arm: Diameter of arm 200mm; Length:2-3meters(optional);360°rotatable. The suction arm is made of temperature resistant, flame retardant and wear resistant material. The suction hood is made of metal. And there is a security grid. In order to withstand the high temperatures during cutting and achieve good suction.
Filter element: size: OD:320*H:400mm(2pcs)
One piece filter area is about 10m2;flame-retardant folded fiber material with an activated carbon adsorption device.
Cleaning method:Manual cleaning
Note:The casters are swivel casters with brakes for easy equipment movement and positioning.
Contact:
Ada wang
Email: filtersales03@le-filter.com
Whatapp/wechat: 0086 18695927657
Skype: filtersales03
