Dust Cartridge Filter Welding Fume Extractor Price

The characteristics of the welding fume cartridge dust collector are as follows:

  ① Since the filter material is pleated into a cylindrical shape, the filter material is arranged in a high density, so the dust collector has a compact 

structure and a small volume;

  ②The filter cartridge is small in height, easy to install, and requires little maintenance work;

  ③The filtration area of the dust collector of the same volume is relatively large, the filtration wind speed is small, and the resistance is not large;

  ④ The pleated filter material requires strict sealing at both ends and no air leakage, otherwise the effect will be reduced.

The characteristics of the welding fume cartridge dust collector are as follows:

1. The filter cartridge uses polyester fiber as the filter material. A layer of sub-micron ultra-thin fiber is adhered to the general filter material. 

The fibers on the adhesive layer are arranged very closely, and the extremely small mesh can Block most sub-micron dust particles on the surface 

of the filter material;

2. The pleated filter material can increase the filtering area and make the dust collector compact;

3. The height of the filter cartridge is small, and the installation and maintenance workload is small;

4. Compared with dust collectors of the same volume, the filtration area is relatively large, the filtration wind speed is small, and the resistance is 

not large;

5. The single-machine dust collector adopts pulse injection online dust cleaning method. The dust cleaning process is automatically controlled 

by a pulse controller. Multiple filter cartridges are installed in the dust collector to increase its filtration area. When a certain (pair) filter cartridge 

meets the dust cleaning setting requirements, the blowing device is started to clean the dust, and the other filter cartridges work normally, so 

that the cleaning is achieved. The dust effect does not affect the operation of the equipment, so that the dust collector can operate continuously; 

the combined dust collector uses separate chambers for offline pulse automatic cycle dust cleaning. Multiple filter cartridges are installed in each 

dust removal room to increase its filtration area. When the filter cartridges in a dust removal room meet the dust cleaning setting requirements, 

the injection device is started to clean the dust, and other dust removal rooms work normally. This not only ensures the cleaning The dust effect 

also enables the dust collector to operate continuously.