Self-cleaning air dust collector

Self-cleaning air dust collector

  • SUMMARY: After the self-cleaning air filter inhales the air containing dust, it will cause the wear of the equipment, and the inhaled dust will scale on the surface of the fan blade, resulting in the dynamic balance of the rotor in the equipment....

Hot Product
Product Details

Model: Self-cleaning air dust collector

Filter medium: air

material: Carbon steel

Working pressure :0.6MPa

Operating temperature: room temperature

Form/Junction: Vertical box

Filtration accuracy: 5-10um

Application: Air compressor front

Product introductions:

The self-cleaning air dust collector is improved in the air intake requirements of similar air compressors at home and abroad. At present, the performance of the filter fully meets the air intake requirements of industrial gas turbine blast furnace blast air compressor. After the self-cleaning air dust collector inhales the air containing dust, it will cause wear and tear of the equipment, and the dust will scale on the surface of the fan blade, causing the dynamic balance of the rotor in the filter to decrease the imbalance accuracy, so that its working life is greatly shortened, and the harmful chemical components in the dust will make the equipment rust and corrosion. Therefore, the aerodynamic equipment must be equipped with high-precision self-cleaning air dust collector.

Performance characteristics:

  1.  self-cleaning air filter can be added at the bottom of the dust collection box, dust filter, water rinse dust removal method to solve secondary pollution according to user requirements. 

  2.  the self-cleaning air filter is controlled by the intelligent distributor, and there are three self-cleaning methods, namely (1) timing; (2) pressure difference; (3) Manual.

  3.  can realize the automatic cleaning of air filter elements, so that the equipment runs as usual, without affecting the normal work of other filter elements.

  4.  It can work normally under the condition of 100% relative humidity.

  5.  the filter area is large, the flow rate is low, the resistance loss is small, and the liquid crystal display resistance loss.

  6.  filter element long service life. Under general environmental conditions, the replacement cycle of the filter element can reach about 2 years.

  7.  high degree of automation, the main components of imported parts, can achieve unmanned operation.

  8.  back blowing air consumption is small, generally 0.1 ~ 0.3m3 /min(inhalation state); The pressure is 0.4 ~ 0.6Mpa.

  9.  the weight of the equipment is light, is the same capacity of cloth bag 1/3-1/2.

  10.  reasonable design, to achieve no bending design, high-rise modular type, easy to install, fast.

  11.  this product has special requirements, the company can carry out non-standard design according to customer requirements, to meet customer needs.

Technical specification:


Application field:

1.Blast furnace induced draft fan of iron and steel plant; 

2. Oxygen compressor inlet;

3. Gas turbines and diesel engines of various capacities;

4. Air conditioning supply system for chemical fiber textile and electronics industry;

5. Central air conditioning systems with high requirements for air dust content; 

6. Air conditioning system for tobacco and paper industry.

More product recommendations:

240,000 air volume self-cleaning air filter

Nitrogen station 160 self-cleaning air filter